1. Base coat: It is a layer of resin glue that is applied on the nail surface before doing nail art.
The main function is to protect the nail as well as to prevent the color glue from falling off, to prevent nail damage and staining, but also to increase the durability of nail polish glue. It prevents nail staining and has a healthy and lasting effect. Enhance the adhesion of nail polish, so that the nail polish is not easy to peel off from the nail surface, but also can play a role in protecting the nail.
Monofunctional monomers such as IBOA monomer can increase the adhesion of nail polish.
2. drying agent / anti-warping glue: drying agent is to use the sponge glue strip sanding nail surface after coating the base glue before, coated on the nail surface. Its main role is to balance the nail surface of a grease and moisture, increase the nail surface and the base glue of a bond, anti-warping and anti-fall off.
3. Reinforcement glue: to solve the nail thin and soft, to prevent fracture or cracking, durable and firm, more lasting color. Can be used to stick nail decorations, reinforcing glue comes with good leveling, can fix the slight unevenness of the nail surface or style of unevenness, and can increase the softness of the nail.
4. No-wash sealer: as the name suggests, no scrubbing, convenient, durable and removable. After painting the light can be, do not need to wipe the floating glue, after the light is harder, nail thin easy to crack.
5. frosted seal layer: nail polish frosted seal layer is the base gel, nail polish, sealer nail polish, stamp oil composition, LED lights under the layers of baking. Matte a texture will make the nails become more advanced, autumn and winter must have a function of the glue
6. tempered sealer: tempered sealer gel thicker, coated in color not only thorough, and brighter, locking the color of a better effect, can effectively prevent the nail surface scratch more wear-resistant.
7. scrubbing sealer: as the name suggests, you need to clean gel or anhydrous alcohol for scrubbing, lasting removable, scrubbing sealer for the end, light 1-2 minutes, wait 10-20 seconds to wipe off the surface of the floating gel with clean gel or anhydrous alcohol.
1. After the nail surface is polished and cleaned, use the base gel to paint a layer of light for 60 seconds to maintain the nail surface to increase adhesion.
2. Take the right amount of color glue from the middle to both sides evenly coated with 2-3 layers, so that the color is more full and uniform, illuminate for 60 seconds
3. Then apply a layer of reinforcing gel to solve the nail thin and soft troubles, increase the hardness of the nail surface can also level the style of uneven, 60 seconds under the light
4. After a color locking treatment with a no-clean sealer, mirror gloss, wear-resistant anti-scratch not cracking, not yellowing
1. Do not dip too much in each brush
2. Brush head from the center of the nail surface to push up, followed by the fingertips to paint
3. Brush the middle first, then brush both sides after sealing treatment.
How many layers of nail polish are usually applied?
1、Sand the nail surface with the coarse side of the sponge file in the order of the sides
2、Sand the front part of the nail
3、 Then polish the side nail surface. When sanding the side, you need to hold the nail skin on both sides of the nail with your fingers gently and then do the sanding action.
Cleaning nails
1、Remove dust from the nail surface and grooves with a dusting brush
2、Wipe the nail surface with a cotton pad or cleaning gel dipped in 75° alcohol
Wrapping, primer, sealer
1、Wrap the edge: first wrap the front edge of the nail with primer, that is, brush from one side of the front edge to the other side, then brush again in the opposite direction.
2. Base coat: Apply a thin layer of base coat along the fingertip.
Color Gel
1、Apply the first layer of color gel: again, wrap the front edge of the fingertip with nail polish.
2, Apply a thin layer of nail polish from the back edge of the nail to the fingertip. When brushing the trailing edge, gently press the brush head on the nail surface and slowly push the finger edge to a distance of 0.5mm, then apply back to the fingertip.
3、Then brush both sides.
4、If you accidentally apply on the skin, use a small wooden stick to roll up a cotton pad dipped in alcohol to clean the nail edge.
5、Shine LED nail lamp.
Sealer
1、Apply a thin layer of sealer in the direction of the fingertip and wrap the front edge of the fingertip with nail polish gel
2、If accidentally applied on the skin, use a small wooden stick to roll up a cotton pad dipped in alcohol to clean the edge of the nail
3、Shine LED nail lamp
4、Remove floating gel: If you use scrubbing sealer, there will be floating gel after lighting, you need to wipe it off with a cotton pad dipped in 95° alcohol
5、Finish.
Nail Polish raw materials : UV Monomer Same series products
Sinomer® ACMO | 4-acryloylmorpholine | 5117-12-4 |
Sinomer® ADAMA | 1-Adamantyl Methacrylate | 16887-36-8 |
Sinomer® DCPEOA | Dicyclopentenyloxyethyl Acrylate | 65983-31-5 |
Sinomer® DI-TMPTA | DI(TRIMETHYLOLPROPANE) TETRAACRYLATE | 94108-97-1 |
Sinomer® DPGDA | Dipropylene Glycol Dienoate | 57472-68-1 |
Sinomer® DPHA | Dipentaerythritol hexaacrylate | 29570-58-9 |
Sinomer® ECPMA | 1-Ethylcyclopentyl Methacrylate | 266308-58-1 |
Sinomer® EO10-BPADA | (10) ethoxylated bisphenol A diacrylate | 64401-02-1 |
Sinomer® EO3-TMPTA | Ethoxylated trimethylolpropane triacrylate | 28961-43-5 |
Sinomer® EO4-BPADA | (4) ethoxylated bisphenol A diacrylate | 64401-02-1 |
Sinomer® EOEOEA | 2-(2-Ethoxyethoxy)ethyl acrylate | 7328-17-8 |
Sinomer® GPTA ( G3POTA ) | GLYCERYL PROPOXY TRIACRYLATE | 52408-84-1 |
Sinomer® HDDA | Hexamethylene diacrylate | 13048-33-4 |
Sinomer® HEMA | 2-hydroxyethyl methacrylate | 868-77-9 |
Sinomer® HPMA | 2-Hydroxypropyl methacrylate | 27813-02-1 |
Sinomer® IBOA | Isobornyl acrylate | 5888-33-5 |
Sinomer® IBOMA | Isobornyl methacrylate | 7534-94-3 |
Sinomer® IDA | Isodecyl acrylate | 1330-61-6 |
Sinomer® IPAMA | 2-isopropyl-2-adamantyl methacrylate | 297156-50-4 |
Sinomer® LMA | Dodecyl 2-methylacrylate | 142-90-5 |
Sinomer® NP-4EA | (4) ethoxylated nonylphenol | 2156-97-0 |
Sinomer® NPGDA | Neopentyl glycol diacrylate | 2223-82-7 |
Sinomer® PDDA | Phthalate diethylene glycol diacrylate | |
Sinomer® PEGDA | Polyethylene Glycol Diacrylate | 26570-48-9 |
Sinomer® PEGDMA | Poly(ethylene glycol) dimethacrylate | 25852-47-5 |
Sinomer® PETA | PETA Monomer | 3524-68-3 |
Sinomer® PHEA | 2-PHENOXYETHYL ACRYLATE | 48145-04-6 |
Sinomer® PO2-NPGDA | NEOPENTYL GLYCOL PROPOXYLATE DIACRYLATE | 84170-74-1 |
Sinomer® TEGDMA | Triethylene glycol dimethacrylate | 109-16-0 |
Sinomer® THFA | Tetrahydrofurfuryl acrylate | 2399-48-6 |
Sinomer® THFMA | Tetrahydrofurfuryl methacrylate | 2455-24-5 |
Sinomer® TMPTA | Trimethylolpropane triacrylate | 15625-89-5 |
Sinomer® TMPTMA | Trimethylolpropane trimethacrylate | 3290-92-4 |
Sinomer® TPGDA | Tripropylene glycol diacrylate | 42978-66-5 |