Application characteristics of LED curing system
The difference between LED curing and high pressure mercury curing and application characteristics
Output waveform is different.
1. Traditional UV mercury lamp curing machine produces UV light looks bright, high heat, the spectrum is very wide 220nm-420nm are covered, the real role in the effective curing of a certain UV spectrum only part of its energy, a significant part is in the visible section (stray light) and generate heat, easy to make the processing workpiece heat deformation.
2. LED UV curing machine, issued by a high-purity single-wavelength ultraviolet light, it belongs to the cold light source, the current market for commercial applications of light sources: 365nm, 385nm, 395nn, 405nm four kinds of light source equipment.
Environmental protection comparison.
1. LED UV curing machine does not contain mercury, ozone-free, green, environmentally friendly, is the best alternative to traditional UV light source
2. Traditional UV mercury lamp curing oven contains mercury, ozone, low environmental indicators
Heat impact.
1. LED UV curing machine cold light source without thermal radiation, the surface temperature of the bearer is low, a complete solution to the rapid light, liquid crystal production in the long-term problem of thermal damage; especially suitable for liquid crystal sealing, film printing and other requirements of low-temperature occasions
2. Traditional UV mercury lamp curing machine heat, the bearer by high temperature deformation
Ease of use.
1. LED UV curing machine without preheating, instant lighting, instantly reach 100% power UV output
2. Traditional UV mercury lamp preheating time is long, a long time to reach the work requirements
Service life: 1.
1. life is more than 10 times the traditional UV curing machine, about 20000-25000 hours.
2. low service life, UV mercury lamp service life of 800 hours
Output energy.
1. LED UV curing machine with high energy, stable light output, uniform light spot, improve quality
2. Traditional UV mercury lamp curing machine wave crest wide, light spot to the surrounding decreasing, uneven
Structural differences
1. LED UV curing machine equipment structure is simple and easy to integrate, can be customized
2. Traditional UV mercury lamp curing machine large size, complex structure
Operating factors
1. LED UV curing machine life is not affected by the number of switches
2. Traditional UV mercury lamp curing machine switch times affect the life
Cost of use
1. LED UV curing machine maintenance costs are zero, the use of LED UV oven to save at least 10,000 yuan per year / unit of consumables costs.
2. traditional UV mercury lamp curing machine regularly updated lamps and other equipment, high costs
LED curing on the UV light curing resin performance requirements
1, fast curing, curing heat requirements are not high. LED curing device does not generate heat, belonging to the cold light source, high temperature is the reaction is a catalyst, LED cold light source system is not conducive to curing.
2, temperature-sensitive substrates, require the resin reaction exothermic as low as possible to avoid excessive exothermic resin reaction, resulting in deformation of the substrate.
3, under aerobic curing conditions, has a strong antioxidant resistance to aggregation. LED light source for a single wavelength, the existing commercial 365nm, 385nm, 395nm, 405nm are deep curing, unfavorable to surface curing.
UV Photoinitiator Same series products
| Product name | CAS NO. | Chemical name |
| Sinocure® TPO | 75980-60-8 | Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide |
| Sinocure® TPO-L | 84434-11-7 | Ethyl (2,4,6-trimethylbenzoyl) phenylphosphinate |
| Sinocure® 819/920 | 162881-26-7 | Phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide |
| Sinocure® 819 DW | 162881-26-7 | Irgacure 819 DW |
| Sinocure® ITX | 5495-84-1 | 2-Isopropylthioxanthone |
| Sinocure® DETX | 82799-44-8 | 2,4-Diethyl-9H-thioxanthen-9-one |
| Sinocure® BDK/651 | 24650-42-8 | 2,2-Dimethoxy-2-phenylacetophenone |
| Sinocure® 907 | 71868-10-5 | 2-Methyl-4′-(methylthio)-2-morpholinopropiophenone |
| Sinocure® 184 | 947-19-3 | 1-Hydroxycyclohexyl phenyl ketone |
| Sinocure® MBF | 15206-55-0 | Methyl benzoylformate |
| Sinocure® 150 | 163702-01-0 | Benzene, (1-methylethenyl)-, homopolymer,ar-(2-hydroxy-2-methyl-1-oxopropyl) derivs |
| Sinocure® 160 | 71868-15-0 | Difunctional alpha hydroxy ketone |
| Sinocure® 1173 | 7473-98-5 | 2-Hydroxy-2-methylpropiophenone |
| Sinocure® EMK | 90-93-7 | 4,4′-Bis(diethylamino) benzophenone |
| Sinocure® PBZ | 2128-93-0 | 4-Benzoylbiphenyl |
| Sinocure® OMBB/MBB | 606-28-0 | Methyl 2-benzoylbenzoate |
| Sinocure® 784/FMT | 125051-32-3 | BIS(2,6-DIFLUORO-3-(1-HYDROPYRROL-1-YL)PHENYL)TITANOCENE |
| Sinocure® BP | 119-61-9 | Benzophenone |
| Sinocure® 754 | 211510-16-6 | Benzeneacetic acid, alpha-oxo-, Oxydi-2,1-ethanediyl ester |
| Sinocure® CBP | 134-85-0 | 4-Chlorobenzophenone |
| Sinocure® MBP | 134-84-9 | 4-Methylbenzophenone |
| Sinocure® EHA | 21245-02-3 | 2-Ethylhexyl 4-dimethylaminobenzoate |
| Sinocure® DMB | 2208-05-1 | 2-(Dimethylamino)ethyl benzoate |
| Sinocure® EDB | 10287-53-3 | Ethyl 4-dimethylaminobenzoate |
| Sinocure® 250 | 344562-80-7 | (4-Methylphenyl) [4-(2-methylpropyl)phenyl] iodoniumhexafluorophosphate |
| Sinocure® 369 | 119313-12-1 | 2-Benzyl-2-(dimethylamino)-4′-morpholinobutyrophenone |
| Sinocure® 379 | 119344-86-4 | 1-Butanone, 2-(dimethylamino)-2-(4-methylphenyl)methyl-1-4-(4-morpholinyl)phenyl- |
| Sinocure® 938 | 61358-25-6 | Bis(4-tert-butylphenyl)iodonium hexafluorophosphate |
| Sinocure® 6992 MX | 75482-18-7 & 74227-35-3 | Cationic Photoinitiator UVI-6992 |
| Sinocure® 6992 | 68156-13-8 | Diphenyl(4-phenylthio)phenylsufonium hexafluorophosphate |
| Sinocure® 6993-S | 71449-78-0 & 89452-37-9 | Mixed type triarylsulfonium hexafluoroantimonate salts |
| Sinocure® 6993-P | 71449-78-0 | 4-Thiophenyl phenyl diphenyl sulfonium hexafluoroantimonate |
| Sinocure® 1206 | Photoinitiator APi-1206 |